- SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 6x139.7/6x139.7
- Center hole: 110 mm
- Outer diameter 176 mm
- 1 pc in the package
- In a car with a center hole smaller than 110mm, use an adapter
With this you bring the rim 25.4 mm outwards in a 6x139.7 split car, i.e. reduce the ET. Distribution remains unchanged. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower base. Top class aluminum from SteyrTek.
For racing or show use only. Not allowed for road traffic.