- SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 5x98/5x112
- Center hole: 58.1 mm
- Outer diameter 150 mm
- 1 pc in the package
- On the outside, the diameter of the collar is 66.5
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 58.1, and the inner diameter is the thickness of your car's axle
With this, in a car with 5x98/5x112 split, you bring the rim 25 mm outwards, i.e. reduce the ET. The distribution changes from 5x98 to 5x112. As shown in the picture, stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower head. Top class aluminum from SteyrTek.
Show or racing use only, not approved for road use.
