- SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 5x120.65/5x120.65
- Center hole: 71.3 mm
- Outer diameter 164 mm
- 1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 71.3, and the inner diameter is the thickness of the car axle.
With this, in a car with 5x120.65 sections, you bring the rim 25 mm outwards, i.e. you reduce the ET. The distribution remains unchanged. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower head. Top class aluminum from SteyrTek.
For racing or show use only. Not allowed for road traffic.
