SteyrTek Adapter (circulation piece)
Thickness: 1 inch = 25.4 mm
Bolt distribution: 5x120/5x112
Center hole inside 74.1mm
Outside collar outer dimension (shaft substitute) 66.6 mm
Outer diameter 156 mm
1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Select the adapter where the outer diameter is the inner diameter of this adapter, i.e. 74.1, and the inner diameter is the thickness of the car shaft.
With this you bring the rim 25 mm outwards in a 5x120 split car, i.e. reduce the ET. At the same time, the division changes from 5x120 -> 5x112. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the car hub are not included in the delivery. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower head. Top class aluminum from SteyrTek. Only for racing use.
