SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 5x112/5x100
- Center hole inside 66.6 mm
- Outside collar outer dimension (shaft replacement) 54.1
- Outer diameter 160 mm
- In the package 1 kp
lIf you want to ensure that the adapter is centered in relation to the car, use an adapter. In the adapter box, the outer diameter is the inner diameter of this adapter, i.e. 66.6, and the inner diameter is the thickness of the car axle
With this adapter, you fit rims with a 5x100 ratio to a car with a 5x112 ratio. At the same time, you bring the rim 25 mm outwards in the car, i.e. reduce the ET. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery.
The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower base. Top class aluminum from SteyrTek. For racing use only.
