- SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 5x110/5x112
- Center hole inside 65.1
- Outside collar outer dimension (shaft substitute) 66.5 mm
- Outer diameter 150 mm
- 1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 65.1, and the inner diameter is the thickness of your car's axle
With this you bring the rim 25 mm outwards in a 5x110 car, i.e. reduce the ET. The division from 5x110 changes to 5x112. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower base.
Top class aluminum from SteyrTek.
Show or racing use only, not approved for road use.