- SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 5x100/5x112
- Center hole inside 57.1mm
- Outside collar outer dimension (shaft substitute, nominal value) 66.6 mm
- Outer diameter 160 mm
- 1 pc in the package
With this you bring the rim 25 mm outwards in a 5x100 split car, i.e. reduce the ET. At the same time, the division changes from 5x100 -> 5x112. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower base.
Top class aluminum from SteyrTek.
Show or racing use only, not approved for road use.
