- SteyrTek Adapter (circulation piece)
- Thickness: 1 inch = 25.4 mm
- Bolt distribution: 4x98 / 4x100
- Center hole inside 58.1 mm
- External dimension of the collar on the outside (substitute for the shaft)54.1
- Outer diameter 160 mm
- 1 pc in the package
If you want to ensure that the adapter is centered in relation to the car, use an adapter. Select the adapter in which the outer diameter is the inner diameter of this adapter, i.e. 58.1, and the inner diameter is the thickness of the car shaft.
With this car, you fit rims with 4x100 spacing to a car with 4x98 spacing. At the same time, you bring the rim 25 mm outwards in the car, i.e. reduce the ET. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower head. Top class aluminum from SteyrTek.
For racing or show use only. Not allowed for road traffic.