SteyrTek ST-40-2DUS Double column lift
one-handed opening of the safety lock New model from SteryTek.
Now the opening of the mechanical safety lock works from a lever on the lifter's operating device. The elevator's descent sped up significantly. Inexpensive, long-lasting and easy-to-use lifter. Very solid construction: pillars made of 5 mm steel, lifting arms made of 8 mm steel, telescopic arms of the lifting arms made of 6 mm steel. The nylon sliding surface of the long-lasting and heat-resistant lifting slide is grease-free thanks to its macromolecular structure. Installation on a reinforced concrete floor of at least 120 mm. You don't need any fasteners to be installed on the casting. 10 holes are drilled in the floor, where the crane is attached with bolts (wedge or chemical anchor bolt).
Lateral locking of the lifting arms with dynamic hydraulic pressure ensures safe and stable lifting. Thanks to the asymmetric structure of the lifting arms, there is room for opening the doors. In addition, door impact protection in both lifting carriages prevents dents. The strength of the lifter's structures exceeds 5 tons, thanks to which the 3-ton payload is fully available. The power of the double hydraulic cylinders is transferred to the lifting carriages by a chain with a five-fold safety margin. A reliable mechanical lifting compensation system with steel cables ensures that the car does not tilt when lifting. Laser cutting of the frame material in one piece ensures consistent quality. Dynamic double cylinder design guarantees operational reliability. Adjustable lifting jacks enable different types of cars to be lifted without damaging the hems. Easy-to-use, reliable and long-lasting mechanical safety lock that does not require compressed air. High quality and strong construction make SteyrTek stable and reliable.
Width measured from the inside of the pillars 2806mm
The maximum width of the car is 2570mm
The height of the feet from the ground in the lower position is 110 mm
Lifting capacity: 3000kg
Lifting height: 1800mm
Withdrawal time: 52s
Calculation time: 22 s
Engine power: 2.2kW
Power supply: 230 V
Height: 2826 mm
Total width: 3420mm
Total weight: 632 kg
