Permanent ceramic coating for plastic caps. Silicon carbide-based coating for solids. Provides long-lasting protection and prevents re-matting of the fillings caused by UV light.
INSTRUCTIONS FOR USE: 1) Polish the blinds with SONAX PROFILINE Headlight Polish blinds polishing paste (SO 276 141) and wipe the surfaces clean. 2) Open the dosage bag and pour the contents onto the SONAX polishing cloth (SO 422 200). Apply the coating thinly on a clean and dry surface. One sachet is enough to coat two cans. 3) Wipe off the residue immediately with a SONAX Ultrafine microfiber cloth (SO 450 700). Allow the coating to dry for at least 4 hours. During drying, the vehicle must not get wet. Do not wash
car for a week after coating.
Markings in accordance with Regulation (EC) No. 1272/2008
GHS02 GHS05
Warning word Danger
H226 Flammable liquid and vapour.
H315 Irritating to skin.
H318 Causes serious eye damage.
H413 May cause long-term adverse effects in aquatic life.
P101 If medical attention is needed, show container or warning label.
P102 Keep out of reach of children.
P210 Protect from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P271 Use only outdoors or in well-ventilated areas.
P280 Wear protective gloves / eye protection.
P302+P352 IF CHEMICAL CONTACTS SKIN: Wash with plenty of water.
P305+P351+P338 IF CHEMICAL CONTACTS EYES: Rinse thoroughly with water for several minutes. Remove any contact lenses if easily accessible. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P332+P313 If skin irritation occurs: Get medical attention.
P501 Dispose of container(s) in accordance with local/regional/national/international regulations.
