The central unit creates a certified Zigbee 3.0 mesh network for the home, to which other devices are connected. The device is also connected to Schneider Electric's cloud service, which enables safe remote use and notifications when away.
Installation instructions The central unit should be placed in as open and central a place as possible, although every Wiser device connected to the mains acts as a message router, enabling a very extensive and reliable system. The device can be installed in a standard device box (installation depth 24mm), directly on the wall or detached on a table. Works either wirelessly with Wi-Fi or with an Ethernet cable.
Take a closer look at the possibilities of using the Wiser smart home system at the following link:
https://www.se.com/fi/fi/home/smart-home/local/wiser/homeowner.jsp Power supply options- 1) 230V with the included adapter and USB cable
- 2) 12VDC/0.5A to the device's cable connectors (transformer not included)
Technical information- Power source
- Via micro USB connection to mains adapter 5 VDC with at least 5 W (1 A)
- Alternatively, directly with a cable 0.25-1.5 mm² with a separate power supply 12 VDC, at least 6 W (0.5 A)
- Nominal supply voltage: 100-240 V AC, 50/60 Hz
- Communication interface: Ethernet - IEEE802.3, 10/100 BASE-T (LAN)
- System clock: Real-time clock (RTC) with coin cell battery (CR1220)
- Operating temperature: 0 to 40 °C, indoor only
- Wi-Fi® – 2.4 GHz, IEEE802.11 b/g/n compliant
- Zigbee – 2.4 GHz, compatible with IEEE802.15.4
- Installation: Can be installed in a 1-part device box or on the wall with the included accessories
- Can also be placed freely with or without a separate table stand (2622119)
Contents of the package- Wiser central unit
- Metal frame for gear box installation
- Network device
- USB cable for network device
- Class II plug
- Screws + plugs and installation instructions
- IP class: IP20, for indoor use