Wireless buttons can be used to control all other Wiser devices in the home, either directly or through ready-made situations. The 1-part button has two channels, so two different functions or situations can be defined for it with the Wiser application. The buttons can be positioned freely, as they do not require a device box at all.
Usage example- 1: The 1-part wireless button in the hall can be used to turn off all the lights in the home with one press. For example, a situation that turns on all the lights on the same floor can be set in the second channel.
- 2: If cabling cannot be done for one reason or another, wireless buttons can still be attached to all kinds of surfaces to control the lighting. In this case, a Wiser module with relay (2622124) or controller (2622120) must be installed as receivers in the ceiling boxes.
Characteristics- Range in an open indoor space 100m, if the indoor space has concrete partitions, the range drops to 25 meters
- The device should not be installed directly on a metal surface, as it may interfere with the signal
- Can be connected to other Wiser products even without a phone app and central unit
- The package contains accessories for different mounting methods
Technical information- Surface mounted transmitter
- Number of channels: 1
- Installation method: Surface installation
- Suitable as a switch: Yes
- Operating voltage 3 V DC, 1 lithium button cell battery CR 2032, battery life up to 5 years (may vary depending on use, number of software updates and environment)
- Indoor range with direct line of sight: Up to 100 m
- Indoors with concrete walls: Up to 25 m
The package contains- Handle
- 1 battery
- Double-sided tapes
- Duct tape
- IP class: IP20, for indoor use
- Certification: Zigbee 3.0
