Basic belt padding for universal 45-50 mm wide belts. Narrow, thin and sufficiently padded for lightweight belts. The friction lining prevents unwanted rolling around.
This is about as simple and versatile as a belt pad like this can be, compatible with virtually any belt that can fit through the grommets. The padding is two layers of 4 mm thick, opaque, closed-cell plastic. The opposite side to the body is rubberized friction fabric and prevents the belt from rotating and moving up and down.
The flat belt loops, made of 25 mm webbing, are 60 mm wide. The gaps between them are 25 mm wide, thus the belt loops can also be used for horizontal attachment of PALS-compatible pockets, e.g. a magazine pocket with a first aid insert on the back.
- Two layers of 4 mm opaque foam
- Body side with rubberised friction fabric
- Flat 60 mm wide belt loops with 25 mm spacing
- Belt loops allow horizontal attachment of PALS pockets
- Three size options (S-M, M-L, L-XL)
- Several colour options with good NIR luminance
Technical specifications:
- Weight: S-M 140g, M-L 160g, L-XL 190g
- Dimensions (P x L): 95 x 8.5cm
- Fabric: 500D Cordura (100% polyamide)
- Fabric: 100% polyester (Multicam 100% polyamide)
.