The lifter can be used to lift the reinforcement coming to the floor without straining the back, and place the support below. Finding the right height for the reinforcement is sometimes challenging, in which case changes are made to the already installed reinforcement. In this case, the tool facilitates the exchange of supports. The lifting capacity of the lift is 100 kg.
UNIQUENESS
The tool has been developed for supports made by different manufacturers under the reinforcement. There are no similar other tools for this job on the market.
ERGONOMIC BENEFITS
Usually, the installation of the supports is done in a squatting position, lifting the reinforcement, while at the same time placing the feet in the mesh of the reinforcement mesh and then placing the support. And if the supports are not used, or have run out, we lift/tear off the net from the casting base using the back and legs. With the lifter, this lifting is done in reverse, i.e. by pressing down, the rebar rises and by bending or crouching a little, the support is installed.
BENEFIT FOR THE CUSTOMER
The reduction in strain reduces the risk of sick leave. If necessary, the supports can also be installed by yourself without much effort.
