The popular Portable Winch PCW3000 is now available in a battery-powered version. Despite its light weight (9.5 kg), it has a pulling capacity of 1,000 kilograms. It is powered by a 1 kW electric motor, which is compatible with an 80/82 W 2–6 Ah battery. With a 2.5 Ah battery, the operating time is approx. 45 minutes, and with a 5 Ah battery, approx. 90 minutes. It is ideal for short-term towing tasks and, best of all, is also suitable for indoor use.
Technical specifications:
- Maximum capacity in straight pull: 1,000 kg
- Maximum load via block: 2,000 kg
- Three speeds: Speed 1 – 8.1 m/min, Speed 2 – 10 m/min, Speed 3 – 11.6 m/min
- Rope diameter: 10–13 mm
- 1 kW, 82 V max. electric motor with overload protection
- 3-speed gearbox
- Oil-bath lubrication system
- Water- and dust-resistant in accordance with IPX3 rating
- Dimensions: 318 x 302 x 310 mm
Sold without battery or charger.
List of compatible batteries:GREENWORKS PRO 80V – 2Ah
GREENWORKS PRO 80V – 4Ah
GREENWORKS COMMERCIAL 82V – 2.5Ah
GREENWORKS COMMERCIAL 82V – 5Ah
POWERWORKS 82V – 2.5Ah
POWERWORKS 82V – 5Ah
CRAMER 82V – 3Ah
CRAMER 82V – 6Ah
STIGA VOLTAGE 80V – 2.5Ah
STIGA VOLTAGE 80V – 4Ah
STIGA VOLTAGE 80V – 5Ah
BRIGGS & STRATTON 82V MAX – 2Ah
BRIGGS & STRATTON 82V MAX – 4Ah
BRIGGS & STRATTON 82V MAX – 5Ah
PORTABLE WINCH 82 V – 2.5Ah
102380217PORTABLE WINCH 82 V – 5Ah
102380279PORTABLE WINCH 82V BATTERY CHARGER
102380277Important points to bear in mind when selecting winching accessories
- The winch’s maximum capacity must be significantly greater than the resistance generated by the average loads being pulled by the winch. Correctly sized loads extend the winch’s service life and allow for a momentary increase in load, for example, if a log hits an obstacle.
- Whenever possible, use a skid plate or similar aid to reduce friction and the risk of snagging.
- The breaking strength of the steel wire rope or rope used for hauling should be at least twice the maximum capacity of the winch being used.
- The breaking strength of the pulley used as an aid should be at least 2.5 times greater than the maximum capacity of the winch being used.
- The breaking strength of the lashing strap attached to the pulley or winch should be at least 3.5 times greater than the maximum capacity of the winch being used.
- The diameter of the sheave, measured from the bottom of the groove, determines the maximum diameter of the steel wire rope or rope to be used. The diameter of the steel wire rope or rope must not exceed 10 per cent of the pulley’s diameter.
