Pipe set specially designed for Korpi and Hohto stoves. Assembling the barrel is very simple. From the modules, you can assemble a chimney that suits your needs, from the fireplace connection up to the chimney cap. The barrel can be extended by acquiring extension parts as needed. The parts fit together and no special tools are needed for connection.
The overall dimension of the barrel is 2600 mm, due to the overlapping of the joints, the useful length of the barrel is 2450 mm. The barrel length includes 200 mm uninsulated starting bend + 2400 mm insulated barrel. The insulated pipe has 50 mm fire stone wool insulation. The insulated section can be extended with 500 mm and 1000 mm extensions (sold separately).
The model includes a 90° non-insulated bend with a built-in smoke damper suitable for the rear outlet of Korpi and Hohto stoves. According to regulations, the smoke damper has an air gap of at least 3%, even when the damper is closed. A radiation shield (sold separately) can be installed in an uninsulated bend, which can be used to halve the shielding distance.
The protective distance of the insulated pipe to the burning material is 100 mm. The protective distance of an uninsulated connecting pipe is at least 400 mm, the recommendation is 500 mm.
The pipe system includes:- Insulated pipe, delivered in three parts: 1m lower section, 1m intermediate section and 0.5m upper section
- Tie rings for the joints of insulated barrel parts
- Non-insulated connecting bend Ø 121/115 mm with integrated smoke damper
- Rain hat
- Inner ceiling cover plate
- Wall bracket, can be shortened by 50-150 mm
- Additional insulation of the upper base max. 400 mm for insulation thickness
- Water roof rubber rain collar for roof slopes of 5-30 degrees
Technical information:
- Inner tube diameter 115 mm
- The outer diameter of the pipe is 215 mm
- Outer sheath material AISI304 stainless steel painted black with silicate paint
- The inner pipe is made of acid-resistant and stainless material AISI444, which is excellently resistant to large temperature fluctuations
- CE approved according to standard EN 1851-1
- Pipe temperature class T600
