Pine 4.17 m2 yard shed
The locations of doors, windows and partitions can be decided during the installation phase.
Conveniently functions as a yard storage, shed, yard building or wooden litter box.
Can isolate partially or completely
FREIGHT INCLUDES YARD DELIVERY IN MAINLAND FINLAND TO THE SOUTH SIDE OF THE OULU-KAJAANI LINE.
When ordering elsewhere, contact
asiakaspalvelu@karkkainen.com Delivery contents:- Wall elements, outer lining as standard 20×120 UTV wood-ready installed vertically or horizontally. Intermediate boards for end triangles and eaves in bulk.
- Door with hinges already installed
- 60×60 cm window and window lining boards already installed in the window elements
- Roof structures
- Corrugated boards 22×100 PL/VL for sheet metal roofing
- Clear installation instructions with pictures
- Height: 2600 mm
- Length: 2540 mm
- Width: 1640 mm
- Color: Wood finish
- Area: 4.17 m2
- Roof area: 9.6 m2
- Frame material: 48 x 48 medaled
- Exterior door: 1pc 860 x 1730 mm
- Fastening accessories: screws 6x90/4x40/4x60 and nails KS60mm, angle brackets
- Chipboards: 28x95mm k600
- Corner and joint boards: 20 x 95 in quantity
- Eaves boards: 20x95
- Delivery package size: 1300 x 1000 x 2400 mm
- Weight: 220 kg
ACCESSORIES: Large additional window In addition, one or two windows with a width of 600 mm x height of 1500 mm can be added to the building.
Small additional window In addition, one or two windows with a width of 600 mm x height of 600 mm can be added to the building.
Additional door In addition to the basic delivery, you can choose one or two doors with a size of width 860 mm x height 1730 mm
Double door A double door with a width of 1860 mm x height of 1720 mm is available as an accessory
Gap element A wall with slots to be ordered instead of the solid wall element in the basic delivery. Total width 1000 mm x height 2000 mm
Convenient for ventilation of a wooden liter
Roofing material Available in black felt, black and dark gray sheet Naroma NT20.
The basic delivery includes the roof rods for the tin roof.
When choosing a felt cover, remember to also choose raw pontoon as the underlay.
Rough draft Raw pontoon board 23x95 mm under the felt cover
Floor elements Split floor elements 28x95 mm board and floor joints 48x98 mm
Basic package- 400 x 400 mm concrete slabs
- Pillar blocks P-240 (one layer)
- 100 x 100 mm trees cut to size
- Felt between the wood and the block
- Necessary nailing plates for possible extensions
The customer is always responsible for choosing the right type of foundation, the instructions and the foundation package are intended for a lightweight foundation and its suitability must be verified for each building site separately. The package and instructions are from flat ground upwards, possible frost insulation and drainage etc. must be chosen according to the soil of the construction site and the way the building is used.
Pulpit ceiling In the basic delivery, the building is delivered with a pitched roof. As an additional order, a console ceiling.
+388,00
+186,00
+247,00
+94,00
+36,90
+215,00
+450,00
+450,00
+197,00
+256,00
+184,00
+88,00
+36,00
+114,00
+152,00
+76,00
+150,00
+313,00
+72,00
+150,00
