The sturdy and easy-to-move Patriot® MultiFix Sensor Holder is designed to be compatible with all different sonar sensors. The aluminum mounting plate at the lower end of the sensor holder has pre-made hole distribution for the most commonly used transom and transom sensors. In addition to sensors attached to the transom, various live sensors (e.g. Lowrance ActiveTarget & LiveSight) can also be attached directly to the sulfur tube of the stand. The height and rotation of the Patriot® MultiFix sensor holder can be adjusted completely steplessly using the quick lock on the mounting bracket. At the top of the tube of the sensor stand, there is also another steplessly adjustable quick lock and a control handle, which enable the stand to be rotated steplessly 360 degrees when using the live sensor. The handle at the top end of the stand is also attached to the pipe with a quick release, so it can be easily removed if the sensor stand does not need to be rotated.
Designed for as many different boats and purposes as possible, the Patriot® MultiFix sensor holder has a sturdy metal-frame mounting kit with 7-step tilt angle adjustment, as well as a long enough (115cm) composite sulfur tube, which can also be easily shortened to the right size for your boat if necessary. No tools are needed to attach the Patriot® MultiFix sensor holder to the boat and it can be installed on the side or transom of all boats with a maximum width of 82mm. With the easy-to-move Patriot® MultiFix sensor holder, the same sensor and echo sounder can be used in different boats. By attaching the Patriot® MultiFix Sensor holder to the side of the box, for example, the same holder can be used well even in winter use.
- Sturdy, metal fastening kit
- Maximum thickness of the attachment point 82mm (e.g. side/transom)
- 7-step tilt angle adjustment
- Durable composite sulfur pipe
- Sulfur pipe length 115cm
- Sulfur pipe diameter 25mm
- Stepless height adjustment
- Stepless rotation adjustment 360 degrees
- Detachable handle at the top
- Can be locked in the desired position
- Quick adjustment thanks to quick-release fasteners
- No tools are needed to install the stand
- Ready-made hole distribution for everyone in the mounting plate
for the most common transom sensors
- Live sensor can be installed directly in the pipe
(e.g. Lowrance ActiveTarget & LiveSight)
- Perfectly suited for vertical jigging
- Perfectly suited for live sensors
- Also suitable for winter use, for example when attached to a box
