Patriot LiveFix 360 is an aluminum, sturdy sensor holder for live sonar use. Thanks to the very versatile adjustment and fastening possibilities, Patriot LiveFix is suitable for installation on almost all types of boats.
The Patriot LiveFix 360 Sensor holder is designed to be installed either on a railing, firmly bolted to a plane, or on a mounting rail running along the inside of the boat (rail mount optional). Thanks to the adjustment grooves in the mounting table of the sensor stand, it is possible to adjust the mounting point and distance of the stand to the optimum for different boats. Thanks to sufficient adjustments, Patriot LiveFix is also suitable for installation on most boats with wider sides, such as Buster, Silver and Faster brand boats.
The versatile adjustments and adaptability of the Patriot LiveFix 360 sensor mount allow the mount to be installed on both smaller and slightly larger boats. The sensor tube is made of aluminum, so it is very easy to work on and, if necessary, shorten it to just the right size for smaller boats. In standard size, the sensor tube is long enough (150cm) to reach below the bottom line even in slightly larger and higher sided boats. It is also easy to adjust the height of the sensor tube by raising it slightly upwards, so that, for example, turning the stand from the casting platform in a fishing situation can be done without reaching.
The carefully considered features and details of the Patriot LiveFix 360 sensor stand make using the stand easy. When lowering the rack to the lower position, the sensor tube locks into its own supported bracket and a light tightening of the locking lever is sufficient. When in the lower position, the pipe stays firmly in the frame, and does not get twisted and warped, but the holder always stays in the right position. In a sounding situation, the rotation resistance of the sensor holder can be fine-tuned using the adjusting nut at the upper end of the holder. The long enough and attention-grabbing indicator handle helps to easily detect the direction of the sensor even from a little further away. When lifting the Sensor holder up to the transport position, it is securely locked horizontally to rest on the mounting table, after which a light tightening of the locking levers is sufficient. It is possible to completely remove the sensor tube from the mounting table during storage and transport, so that no other parts get stuck to the boat. The sensor tube can also be turned inside the sides of the boat for protection, for example during trailering.
Patriot LiveFix 360 is designed to work e.g. Lowrance Active Target, Garmin Panoptix Livescope and Humminbird Mega Live with sensors.
- Sturdy and light aluminum construction
- Versatile adjustment and attachment options
- Sturdy 10mm thick aluminum mounting table with adjustment grooves
- In the lower position, the sensor tube locks into the supported bracket and always stays in the correct position
- In the upper position, the sensor tube is securely locked horizontally against the mounting table
- Quick-release locking lever for quick and easy use
- Can be installed on a railing, platform or rail (rail bracket optional)
- Included fixing accessories for railing installation (25mm / 1? for pipe)
- Detachable pointer handle
- The sensor tube can be removed, leaving only the mounting table in the boat
- The sensor tube can be turned inside the side of the boat, for example during trailering
- Infinitely adjustable height
- Continuously adjustable rotation resistance
- Total length of sensor tube 150cm
- The sensor tube is designed to be shortened to a suitable length for each boat
- Sensor tube diameter 25mm / 1?
- The inner tube structure allows the cord to be attached to the outer tube
- Bolts and fasteners made of stainless steel
- Suitable for installation on almost all types of boats
- Designed for use e.g. Lowrance Active Target, Garmin Panoptix Livescope and Humminbird Mega Live with sensors
