Osmo Color TopOil 3058 is a product suitable for interior wood surfaces and gives a beautiful wood finish. It is particularly suitable for worktops and furniture, but can also be used for mouldings, partition doors, window frames, toys and decorative objects. TopOil is suitable for a wide range of wood species, including pine, spruce, larch, oak, birch, beech, ash, maple, elm and alder. The treated surface remains breathable. TopOil is used on untreated wood surfaces or on wood surfaces sanded to a wood-pure finish in warm and cold indoor environments. It is also well suited for use in damp interiors such as kitchens and bathrooms, and on surfaces where food is handled. TopOil can be used to finish surfaces tinted once with Osmo Color Oil Stain or Wood Wax against abrasion. Used alone, it enhances the wood's own tone. TopOil is easy to apply and takes up to 20 minutes to finish the application evenly after application. The treated surface will dry in approximately 12-24 hours at normal room temperature. During the drying period, it is important to ensure good ventilation. The product is applied 2-3 times to the new surface. On a wood surface that has been tinted once, apply 1-2 times. The number of coats depends on the tool used. - colours: colourless or white oak - gloss: matt - coverage: minimum 24 m²/l. TopOil belongs to the M1 group of emission classifications for building materials. SURFACE PREPARATION Clean untreated wooden surfaces from dirt and dust before application. Remove previous hard coatings. We recommend sanding the surface for better and more even absorption. A suitable finish sanding thickness for flat surfaces is P150. REGREASE Stir TopOil thoroughly before use and from time to time during use. Apply with an Osmo microfiber roller, Osmo brush, foam brush, wood wax pad or cloth. Choose the tool according to the application and your preference. Allow the surface to dry properly between coats and before use. Apply a thin coat to ensure that all the material is evenly absorbed into the wood. Tools should be washed with solvent-based benzene. However, the roller and brush do not need to be cleaned between applications if they are well preserved. SURFACE CARE Dry wiping and wiping with a lint-free cleaning cloth is sufficient to care for the surface. When the surface needs washing, Osmo Color Oil Soap is suitable. The treated surface reaches its final hardness and liquid resistance in about two weeks and should be used with care before that time. The surface should only be maintained as necessary. TopOil or Osmo Color Maintenance Oil is used for re-treatment. COMPOSITION TopOil contains sunflower oil, soybean oil, shea butter, carnauba wax, candelilla wax and paraffin wax, as well as drying agents and water repellent additives. The solvent in the product is aliphatic solvent benzine.
Show more