Wood-finished panels can be finished with a variety of varnishes, paints, oils or waxes. Treatment according to the manufacturer's instructions.
- Raw material Healthy Spruce (TK)
- Profile STV
- End-jointed
- Size 14 x 120 mm
- Length 2970 mm
- Volume 9,1 m/m²
- Packaging Shrink film packaging, 8 pieces per package
- 2,61m2 per pack
- Applications Interior cladding
Store panels in a place protected from moisture and sun. Do not open the panel tops until installation or processing is underway.
For interior cladding, a maximum moisture content of 16% is recommended. Foil wrapped panels should be allowed to equalise to the conditions of the installation space in their packages for two days.
Underneath the cladding, a 22x50 or 25x50 girder is used, for example, which is fixed either vertically or horizontally, depending on the direction of the panelling. Check the straightness of the assembly under the spirit level and, if necessary, straighten it using wedges.
In wet areas, a ventilation gap must be provided behind the panel, using the flashings. Leave airflow openings at various points in the horizontal framing.
The panels are fixed to the framing by nailing or screwing. The easiest way is to do it as a hidden nail from the male point using a finishing nailer. In the absence of such a nail, a hammer and chisel can be used. Depending on the width and thickness of the panel, either one or two nails should be used at the edge of the nailing line. For panels over 145 mm wide, it is recommended that the panel be fixed from the top, in which case holes for the screw fixings are drilled in the panel beforehand.
Full installation instructions can be found at: www.puuinfo.fi/julkaisut-kuluttajille.
The wood is a natural product, making each panel unique in its grain and branch structure. The product is graded according to RT 21-10626. Before installation, please check that the product matches the quality you have ordered. Any defects in the products can only be claimed before installation.
For maintenance, we recommend light sanding followed by treatment with a selected substance.
The product is ecological. Used panels or scraps can be disposed of by incineration. The product does not release harmful emissions into indoor air and does not contain any toxins or harmful chemicals. The protective wrapping of the packaging can be recycled.
