MyWater cleaner is intended for use in outdoor whirlpools,
small swimming pools and hot tubs and jacuzzis with a
water volume of more than 700 liters but less than 2000
liters. The substance does not leave anything in the water
that would cause odors. Destroys bacteria from the bath
water, clarifies the water, removes unpleasant odors and
cleans and destroys the biolfilm accumulated in the
pipeline. MyWater is a 100% chlorine-free, skin- and
environmentally friendly and very easy-to-use cleaning
chemical. BEFORE USING THE CHEMICAL
• Make sure that the pool bath temperature is above 24
degrees. The chemical works best when the bath water is
above 24 degrees.
• The chemical compound works regardless of the pH
value. It is recommended to keep the pH value within the
guidelines, an incorrect pH value may cause neck pillows
and plastic parts to fade, for example. We recommend
checking the pH value (guideline value 6.5 – 7.6) before
using the substance.
• Remove loose objects from the pool water while adding
the chemical and taking effect, for example
thermometer, drink holder, etc.
• The use of the chemical can be started even if chlorine
has already been used as a cleaner, If you used other
cleaners or combination in bath, we do not recommend
use MyWater before replacing water. We cannot be sure
what other manufacturers’ ingredients contain and how
they react to MyWater’s active ingredients. We
recommend that you change the bath water before
using MyWater.
USE
1. Pour 50ml of liquid from the A bottle into the C mixing
bottle found in the package.
2. Pour 50ml of liquid from bottle B into mixing bottle C. The
water purifier is now activated and turned yellowish.
3. Screw the cap on the C mixing bottle and shake lightly.
After this, loosen the cap (gas will be released from the
bottle). Wait 5 min.
4. Pour the cleaning agent into the jacuzzi or tub. Make sure
the substance mixes with water. The water turns
yellowish.
5. Let the substance act for about 1 hour (the time may vary
depending on the dirtiness of the water) – the jacuzzi or
hot tub is ready for use when the yellowish color has
disappeared.
• Rinse the C mixing bottle with water after each use.
• Repeat water purification every 1-2 weeks, depending on
use. OTHER CONSIDERATIONS
• Keep the pool lid open for at least 15 minutes after
adding the substance.
• Ensure the mixing of the chemical with a pool filtration
cycle or a bubble system. The substance can be poured
directly into the filter if possible.
• Pools without a separate filtration system, make sure that
the substance is mixed after adding to the pool water by
using, for example, a pool water mixing paddle
