Maston WOODmix Water-based CLOU Stain varnish. For the treatment and renewal of untreated and previously treated wooden surfaces. Translucent, light-resistant surface. Also suitable for children's toys. Meets the requirements of DIN 68861-1C and EN71-3. FOR INTERNAL USE ONLY. Gel-like.
This is how you succeed!
- Pretreatment: Untreated surfaces: Sand the surface with sandpaper no. 220. Clean the surface of sanding dust, oil, grease and other impurities. Previously treated surfaces: Sand the flaking or otherwise damaged surface. Clean the remaining surface of impurities. Sand the surface with sandpaper no. 220 and remove sanding dust.
- How to work: Mix the varnish thoroughly before use. Apply thinly in the direction of the grain of the wood. Smooth the varnish carefully. Untreated and, if necessary, previously lacquered surfaces are treated 2 times. After the first treatment, let the surface dry thoroughly and perform an intermediate sanding with sanding paper No. 240. Remove the sanding dust and repeat the treatment. Lowest working temperature: +8°C
- Thinning and washing of tools: water (thinned approx. 5% if necessary) Drying times: (+20°C) dust dry approx. 20 min, contact dry approx. 2 h, through dry approx. 24 h. Coverage: approx. 12 m2/l with one application . Protect from freezing. Keep out of reach of children. Do not empty into the drain.
