GKN's SX pivot is an original spare part that maintains the normal movements of the bike. The exceptional and patented design of the SX joint allows for turning angles of more than 50 degrees, which other joints are not capable of. The joint has eight balls and specially shaped ball grooves. The SX joint has 30% lower power loss at all turning angles, 15% smaller size and lower heat dissipation. The SX joint can transmit 25% more power than a conventional joint of the same size.
Joint type: constant velocity joint
External resistance wheel side: 42
Internal clearance, wheel side: 30
Seal diameter [mm]: 77 mm
Detail: with socket groove on inner side
Protective cover: with dust cover
Joint diameter [mm]: 104 mm
Length [mm]: 97 mm
Thread size: M16x1.5
Material of rubber: TPE (thermoplastic elastomer)
New part:
Accessory/additional information: grease
Technical data
Please observe the specific technical specifications for the
joint. Here, a bending angle greater than 50° is required!
GKN Automotive Countertrack® joints are structural components,
whose technical specifications correspond exactly to the OE joints.
The bending angle and torque of the joint guarantee full
performance.
No structural modifications to the vehicle are required.
The steering geometry and handling of the vehicle remain unchanged
unchanged.
This is only possible by using
only by using GKN Automotive's "Countertrack®" type gearboxes!
(More at www.gknautomotive.com/)
Country of origin: DE
Customs code: 87085055
Reference number
EAN
OE
41-306692
306692
41-306692
4019064369066
Audi: 4KE 498 099
760 498 099 AX
Lamborghini: 4ML 498 099
