Korrek BOAT TFC UV-Coating is very easy to work with, the product is created quickly and the end result is great.
Handy starter kit for making a boat's protective coating: Korrek BOAT TFC UV-Coating (700 ml), application sponge and microfiber cloth.
Spray the UV coating on the surface of the boat, spread with a sponge and dry with a microfiber cloth. Very easy to work with, the product is produced quickly and the end result is great. Very durable thin film coating for the boat with UV protection and brilliant shine. The surface effectively repels dirt, oil and other impurities throughout the boating season. When washing, the dirt comes off even easier.
Use
The lowest operating temperature is +5°C.
1 . Wash the boat before the coating treatment with Korrek BOAT Shampoo. Pre-wash stubborn dirt with Korrek BOAT Hull Cleaner. Worn/dirty surfaces are recommended to be treated with Korrek BOAT Cleaner Wax before coating.
2 . Shake the bottle before use. Spray the coating on the application sponge or directly on the area to be treated. Go through the entire areas to be treated like this. It is important that you use a clean sponge for application, e.g. Korrek Car Wash Sponge, so that the coating is spread evenly on the treated surface.
3 . Finish by drying with a Korrek microfiber cloth. Alternatively, you can rinse the surfaces with water and finish them by drying. The formation of a protective and shiny surface does not require mechanical polishing.
4 . Finish by drying the surfaces with a Korrek microfiber cloth.
Applications
Korrek Boat TFC UV-Coating is suitable for gelcoat, rubber, plastic and metal surfaces. The product is particularly suitable for the protection of tight and difficult places, because the formation of the coating does not require mechanical polishing. Sufficiency. 30-foot boat/ 50 m2
1272/2008 CLP
Markings
Warning word danger
H319 Severely irritating to eyes.
1272/2008 CLP
Markings data
Signalord fel
H319 Orsakar serious eye irritation.
