A car wax containing carnauba wax that provides extremely durable protection for the protection of paint surfaces of all qualities and colors.
A mixture of special polymers and high-quality natural waxes, thanks to which the paint surface becomes very slippery and the wax surface is durable, thus making car maintenance washes easier.
Wash and dry the car before waxing. Wax the car in the shade/semi-shade, because the paint surface of the car must not be hot, and the wax cannot be applied in direct sunlight.
Operating temperature approx. +10 to +30 °C.
1. Shake the bottle vigorously.
2. Dispense the wax onto a clean cloth (KORREK Car Cloth) or a sponge intended for wax application (KORREK Polishing Set).
3. Apply a thin layer of wax on a clean and dry surface. You can spread the wax all over the entire surface of the car. Dosing should be moderate, because excess wax makes wax removal and polishing more difficult. If wax gets on rubber or plastic surfaces, wipe it off immediately.
4. Allow to dry to a light gauze. The drying time is affected by air temperature and humidity. The wax is dry when it "dusts" off when wiped.
5. Wipe off the wax with a clean cloth (KORREK Car Cloth).
1272/2008 CLP
Markings
Word of caution warning
H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H412 Harmful to aquatic life, long-term adverse effects.
1272/2008 CLP
Markings data
Signalord Warning
H226 Flammable liquid and vapour.
H304 Kan vara dödlig vid förtäring och kommer in i luftvägarna.
H412 Harmful to aquatic organisms with long-lasting effects.
