Charlie Latausasema is designed and manufactured in Finland. Innohome is a well-known and recognized manufacturer of smart fire safety products, which has now developed its range of electric car charging stations especially for home use.
Charlie is a high-quality charging station specially designed for Nordic weather conditions.
Charlie is a mode 3 charging station designed for fully electric and hybrid vehicles. It has a type 2 connector that is compatible with almost all European electric vehicle charging cables. The stylish Scandinavian appearance easily adapts to its surroundings. A rain cap sold separately provides additional protection and improves the appearance even more.
Charlie's installability has already been invested in during the design phase. Its structure and clear installation instructions make installation as quick as possible. Due to Charlie's built-in 6 mA DC residual current protection, there is no need to purchase an expensive B-type residual current protection for the installation site, which would increase installation costs significantly. The usual A fault current protection in the electrical cabinet is sufficient.
Connect the cable and charge. That's all. You don't need extra apps. Charlie's LED lights tell you the charging status and when the charging is complete.
Charlie's maximum charging current of 32 amperes ensures a full battery when charging overnight. Depending on the vehicle, one hour's charging gives you about 40 driving kilometers with the 1-phase version and about 120 driving kilometers with the 3-phase version. Charlie-1 enables 1 x 32A (7.2kW) and Charlie-3 3 x 32A (22kW) charging.
In Charlie-3, the possibility to share the load with max. for the three subunits.
Typical outdoor sockets (suko) are not designed for frequent and long-term charging of electric cars. They can overheat and be dangerous in that use. Charging from a regular socket is also much slower than from a charging station designed for charging a vehicle.
Charge safely at the Charlie Charging Station. You can worry-free leave your car charging overnight and sleep peacefully yourself.
Charlie 3 is a 3-phase 3x32 A / 22 kW electric car charging station with a type 2 charging plug. Includes 6 mA DC residual current protection. Residual current protection with type A protection. Limiting the charging current can be done with dip switches. Made in Finland.
Technical information:
● Charging mode 3 (IEC 61851-1 Charging Mode 3)
● Type 2 connector (IEC 62196 Type 2 Charging socket)
● 1- or 3-phase 230VAC supply
● 32A maximum charging current (7.2kW-22kW) = depending on the vehicle, up to 120 km of driving with one hour of charging
● Dimensions (hxwxd): 305 x 219 x 160 mm
● The installer can adjust the output current to be optimal
● In the 3-phase version, the possibility of load balancing up to four charging stations and potential-free external control input
● Built-in 6mA DC residual current protection
● LED lights to indicate charging status
● IP44 enclosed
● Operating temperature -25 to +50 degrees (Celsius)
● CE certified
● Designed and manufactured in Finland
