Ilves Lattialakka is a water-based 1-component varnish for wooden and parquet floors indoors. Suitable for wood clean and previously varnished floors. Ilves Lattialaka has a good durability and does not turn yellow. Intended for household use.
INSTRUCTIONS FOR USE: If you varnish previously varnished floors, it is important that you test the suitability and adhesion of the varnish on a small area first. Lightly sand the former varnish surface so that the new varnish adheres well. Also, when varnishing a new wooden floor, the surface should first be lightly sanded. The floor must be clean, dry and dust-free when varnishing. Take care of good ventilation while working and wear protective glasses and gloves. Protect nearby surfaces from splashes. Mix the varnish thoroughly and let it stand after mixing to remove air bubbles. Apply 2-3 thin layers of varnish with a floor trowel, short-pile roller or brush. Allow to dry for at least 2 hours between coats. You get the best result when you sand the surface lightly between coats. For a previously varnished floor, 1–2 layers of new varnish are sufficient.
- TONE: The bright, final shade depends on the wood species.
- WASHING TOOLS: Water (the product is not diluted).
- COVERAGE: 8–10m2/l/application.
- DRYING TIME: Can be repainted after 2 hours (when the air temperature is +20 °C and the relative humidity is 60% RH). Full durability for a new or sanded floor is achieved after about 4 days. The curing time of a previously varnished floor can be longer and the final hardness is formed within 4 weeks.
