Matt wall paint suitable for interior wall painting, including concrete, plaster, brick and screed surfaces, chipboard, gypsum and wood fibreboard surfaces, as well as new and renovation painting. For wall and ceiling surfaces such as hallways, living rooms, bedrooms, etc. Not suitable for wood, panels, doors, furniture or varnished surfaces. Can be used as a top coat on panels if the surface is first treated with Ilves Adhesion Primer. Adheres well also to surfaces previously painted with alkyd and oil paints. Product description: Make sure that all paint cans are from the same batch or alternatively mix different batches together to avoid shade differences. INSTRUCTIONS FOR USE: Clean previously painted surfaces, for example with Ilves Painter's Cleaner and rinse well with water. Clean new surfaces of dirt and dust. Use a leveling compound if necessary. Prime steel surfaces with Ilves Rustproof Paint. Prime previously unpainted and porous surfaces that absorb paint more. Roughen hard and shiny surfaces previously painted with alkyd paint and remove sanding dust before painting. Mix the paint well before use. APPLICATION METHOD: Brushing, rolling or spraying WORKING CONDITIONS: The surface to be treated must be dry and dust-free. The air temperature must be at least +5 °C and the relative humidity must be below 80%. COVERAGE: 6–8 m²/l depending on the substrate. DRYING TIME: Dust-dry 1 h, recoatable 2–4 h. GLOSS LEVEL: Matt. THINNER AND TOOL WASHING: Water. TRANSPORTATION AND STORAGE: Transport in an upright position and supported. Protect from freezing. Keep out of reach of children. PACKAGING DISPOSAL: Empty cans should be disposed of with mixed waste or in accordance with local sorting instructions. Liquid surplus paint should be delivered in cans to hazardous waste collection.
Show more