Ilves Tile paint - light gray. Semi-gloss, well-leveling tile paint. Suitable for dry and wet wall tiles.
Applications are for example: tiles in the kitchen, dry toilets, utility rooms
and on the bathroom walls.
Make sure all paint cans are of the same batch or alternatively
mix different batches together to avoid shade differences.
Instructions for use: Carefully remove the old silicones. Be careful not the one under the silicones
the waterproof membrane breaks. Clean the surface carefully of grease as well
lime deposits with Ilves Paint wash (Ilves Maalarinpesu) or soda detergent. Sand the surface to be painted with fine sandpaper. You don't need a surface
priming. Mix the paint thoroughly.
Paint the tiles and seams
with a small mohair or foam roller. Finish the corners and edges
with a brush. Paint the surface 1-3 times.
Painting method: brushing or rolling.
Coverage: 10–12 m²/l
Drying time: Dust dry 4 h. Repainting
under normal conditions after 12 hours. The painted surface is ready
for water splashes 2 days after painting and reaches the final
hardness after 28 days. Indicative drying time measured when
temperature +23°C and humidity RH 50%. If the air humidity is higher and
the temperature is lower, the drying time of the paint increases.
Gloss-level: semi-glossy.
Thinner and washing tools: water.
Working conditions: The surface to be painted must be dry and dust-free.
Temperature at least +8 °C and relative humidity below 80%.
Transport and storage: Transport in an upright position and supported.
In a cool and dry place. Protect from freezing.
Harmful to Aquatic life, long-term adverse effects. Avoid release
to the environment.
