- Pakla Metalkitti is a fast-hardening two-component metallic gray polyester putty whose hardener uses benzoyl peroxide (Bpe)
- Pakla Metalkitti is a micro-granular metallic mass that is particularly suitable for straightening and smoothing metal surfaces
- The putty can be used to repair rust damage, smooth the orange surface, smooth out dents, cover welding seams and repair small cracks
- Metal putty can also be used on other hard surfaces, such as fiberglass
- Hardened chemical metal can be ground, drilled and tapped
Instructions:
- Sand the surface clean of rust and dirt
- Wipe away sanding dust and remove oil and grease stains with Pakla Aceton
- Only take the amount of putty at a time that you can apply in five minutes
- Mix the hardener paste included in the package into the putty at 1% of the amount of putty by weight
- Apply the paste to the affected area in long strokes
- Strokes are made with a sharp spatula from two directions, e.g. longitudinally and transversely
- In general, polyester putties shrink a little when they harden, so it is often necessary to apply another layer
- The surface is sanded lightly before the new layer
- The putty hardens in 5-10 minutes, and can be handled approx. 20 minutes after hardening
- The final sanding can be done with the appropriate grit, but if you want to use water sanding paper, you should let the putty harden for 3-4 hours before sanding
- This ensures complete hardening of the putty, making it resistant to water sanding as well
- Curing time: Many things affect the curing time, e.g
- The material of the base, thermal insulation, air humidity, temperature, thickness of putty, direct sunlight and amount of hardener
- Normally, 1mm thick putty hardens in 10 minutes (20ºC in a dry interior)
- Working hardness is reached in 20 to 30 minutes, and the putty reaches full hardness within a day
- It should be noted that the thinner the putty layer, the longer it takes to harden
Markings: 2008/1272/CLP
Warning word danger
H332 Harmful by inhalation.
H319 Severely irritating to eyes.
H226 Flammable liquid and vapour.
H361 - Suspected of impairing fertility or damaging the fetus.
H315 Irritating to skin.
H372 Causes damage to organs through prolonged or repeated exposure.
Marking information: 2008/1272/CLP
Signalord: fara
H332 Farligt vid inandning.
H319 Orsakar serious eye irritation.
H226 Flammable liquid and vapour.
H361 Mistänkt för att skada fertilityten eller det opödda barnet.
H315 Irritating to skin.
H372 Orsakar organskador genom long-term eller ektetad exposure.
