If your player does not have RCA outputs for amplifier connection, you can still connect the amplifier using high-quality AAC, which converts the speaker outputs to line-level.
Features:
-Start&Stop* car compatible
- Ingenious speaker level input with ADEP** circuit (Advanced Diagnostics Error Protection)
- Maximum input voltage for speaker level input 25V
- Splitters can also be used with full active front speakers thanks to the wide range of adjustments.
ADEP*
Smart speaker level input.
The new generation of factory fitted car radios also have speakers connected to the car diagnostics, thus terminals with normal speaker level input will immediately give a fault code to the car, the ADEP protection developed by Audiotec-Fischer does not cause a fault code in these cars.
Start&Stop**
Audiotec-Fischer has developed a new type of regulated power supply for the G-Series that allows 100% operation even in Start&Stop cars, meaning the amplifier stays on even if the voltage drops below 6 volts. This also does not damage the amplifier itself thanks to intelligent regulation.
Max. speaker input level25 Volts (= 155 Watts / 4 Ohms)
Input impedance13 Ohms
Max. output level4.0 Volts
Frequency response18 Hz - 80,000 Hz
Max. current for remote output200 mA
Operating voltage7 - 18 Volts
Dimensions (H x W x D)77 x 37 x 20 mm /
3.03 x 1.46 x 0.79″.
