Chlorine-free shock-acid granules are used to disinfect pool water. The active ingredient is active oxygen. Used in combination with an activator, which significantly increases the disinfection efficiency of the granules.
The product is used for both normal and shock treatment of pool water in combination with the Activator. When the product dissolves in the water, an active substance is released which oxidises the impurities in the water. The product only works properly when used regularly and according to the instructions.
Instructions for use:Use for the first treatment and for the shock treatment, which should be repeated every two weeks, approx. 20-40g /1 cubic metre of water. In general, water remains clear and hygienically clean when its pH is between 7.0 and 7.4 and its active acid content is between 8 and 12 mg/l. The product is naturally acidic, so it lowers the pH and alkalinity of water. It is therefore necessary to regularly monitor both the active acidity and pH of the water when using it.
Dosage method:Dissolve the chemical dose completely in water in a clean plastic bucket... ALWAYS ADD THE PRODUCT TO WATER, NOT IN WATER! Pour the product dissolved in water directly into the basin. The filtration system must be running during and 24 hours after the chemical is dispensed.
