Charging station Entity Pro 22 SVGI O, 22kW, Type2 socket, 3x32A, 400V, Residual current protection type A, DC direct current monitoring, Visible kWh meter MID, OCPP, 4G SIM card slot, LAN, WiFi mesh, IK10, IP54, Power connector . 16mm2 Al/Cu chainable. Nominal current 3x32A/400V. The Entity PRO complete charging station includes a mounting base, a charging station and a cover. The charging station is suitable for installation in the parking lots or parking garages of single-family houses, condominiums and offices. OCPP compatible with charging operators' systems. The charging station is available in a version for one or two cars.
The GARO Connect application (free) enables:
load management in up to four (4) levels
assigning access rights with RFID or an application
reading consumption data remotely and centrally
viewing charging information/power in online mode (for motorists)
updates to the latest application version
The station can be installed on the wall, on a pole with a bracket, or on the ground with the help of a stand designed for a separate charging station.
The Entity PRO comes with a power outlet, a visible MID-approved kWh meter and an integrated Residual Current Device (RCD) with an all-pole mechanical AC and DC circuit breaker that meets all requirements. The charging stations can communicate with each other via Ethernet cabling or mesh WiFi. Internet connection via LTE CAT M1, Ethernet or Wi-Fi.
Things to consider during installation
Installation may only be performed by an electrical professional.
The customer replies that the object is suitable for the installation of the selected device.
The initial survey should be done carefully for each object.
Pay attention to whether fault current protection or other changes to the electricity supply or control are needed.
Onninen is a reliable partner in purchasing electric car charging points. More than 50 Express pick-up stores serve professional customers all over Finland and Onninen Verkkokauppa is open around the clock. Welcome to visit!
