EXIT pool heat pump 15m3 - black
Swimming pool heat pump EXIT is an alternative for heating swimming pool water. The capacity of the heat pump is 15,000 liters and it can be easily connected to filter pumps with a capacity starting at 530 gal/h. The heat pump turns the outside air into heat and is effective even at an outside temperature of 10 degrees. The transferred heat can then be used to heat the pool water up to 40 degrees. EXIT's heat pump would not only extend the swimming season, but also allow you to enjoy using your pool on less sunny days.
Easy installation
The EXIT heat pump can be easily connected to the pool and the filter pump with just two hoses. One pipe is connected to the filter pump and the other to the swimming pool.
Durable heat pump
The EXIT heat pump for swimming pools is easy to use with the help of a digital display, which can be used to set the desired water temperature. The pump switches off when the water has reached the set temperature, and automatically restarts when the water reaches a temperature lower than the programmed one. This way, the pump only consumes energy when needed.
The COP value shows the efficiency of the pump. When the outside temperature is 26 degrees, the yield increase can be up to 5.50 kilowatt hours. This means that when 1 kilowatt hour of electricity goes to the pump, 5.5 kilowatt hours of heat enters the pool. That's a heat output of 4.5 kilowatt hours! In short: the EXIT pool heat pump is an easy-to-use and energy-efficient option for heating pool water.
- Dimensions: 40 x 45 x 38 cm
- Voltage: 230V
- Power: 990 watts
- IP code: IPX4
- Noise from a distance of one meter: 53 db
- Diameter hose connection: 32 mm, 38 mm
- Pool volume: ≤ 15 m³
- Control panel: Digital display
- COP: 5.7, 4.1
- Heating temperature range: 15 - 40 ℃
- Operating range: 10 to 43 ℃
- Filter capacity: 530 gal/h (2006 liters)
- Warranty: 2 years
