Esteri SyncroDry HC is a heat pump air dryer designed for drying laundry, which reuses the heat for drying. The HC microprocessor designed for humidity control monitors the machine's functions. Operation from the front panel or an external NOK center. The machine's display shows the selection of the drying program, operating information, maintenance notifications and error codes. Drying room size 5-15 m², humidity control.
Thanks to the heat pump function, the energy consumption is low, only 0.36 kWh/kg. Humidity control prevents waste by stopping drying when the laundry is dry. The very quiet running sound allows the machine to be used throughout the day.
Quick to install- The electrical connection points of the air dryer are concentrated in one place under the lid. The output height of the exhaust pipe is 430 mm. In this way, a sufficient drop is obtained in the outlet pipe, even if the sewer connection is further away. The discharge pipe can also be connected directly to the sewer network, as the machine has an odor trap. Condensate can be pumped upwards with the optional drain pump.
-Drying room 5-15m²
-Drying capacity 2.1-3.7 l/h
-Drying time 80 min
-Energy consumption 0.36 kWh/kg
-Humidity control
- Heat pump condensing
- Sound level 56 dB
Dimensions: W 630 x D 560 x H 1020 mm
Electrical connection:
- Current type 3N 400V 50hz
- Connection cable 5x1.5mm²
-Fuses 3x10A
Heating power 2.3 kW (thermostat-controlled preheating resistor)
Maximum rated power 3.9 kW
Drain connection:
-Connection Ø 32mm
-Height from the floor 430mm
The product has a 2-year full warranty for housing associations and a 5-year structural warranty.
