- Application:For dry indoor use.
- Material: pine
- Treatment: painted
- Colour: white
- Weight × Width: 11 mm × 16 mm
- Length: 3600 mm
Preparation for installation
- Products should be stored in a dry indoor area, protected from rain and sunlight.
- Before installation, allow the temperature and humidity of the product to equilibrate to the conditions at the installation site, stacked loosely, for about a week.
- The room temperature and humidity at the installation site should be normal, with a temperature of about 20 °C and a humidity percentage of less than 50%.
- To avoid differences in colour, it is recommended that the products are from the same production batch
Installation instructions for skirting boards
- Provide good lighting at the installation site during installation.
- Attach the mouldings with a finishing nail
- Attach to the stone wall with mounting adhesive or by propping.
- Do not pierce the vapour barrier plastic.
- When fixing with screws, the piece must be pre-tensioned to avoid cracking
- At approximately 60 cm intervals, fix the piece to the wall
- Before fixing, press the piece firmly against the mounting surface
.
