DD Audio RL-AE10 10″ flat active subwoofer from the Redline collection with an aluminum die-cast housing.
A 10″ element with a rigid aluminum cone is installed in the aluminum casting case. Two pieces of passive radiators and a powerful 700W amplifier are also installed in the case. Suitable for installation, for example, under the front seat, on the back of the back seat, on the side of the trunk, on the back wall in a pick-up truck, etc., etc.
The signal can be brought in as RCA or speaker level
( auto turn on )
The package includes: Wired level controller, high-level wiring harness, fixing irons + screws.
HIGH LEVEL connection cable color codes:
White = Front-Left +
White/Black = Front-Left –
Gray = Front-Right +
Grey/Black = Front Right –
Black = Not connected at all.
Operating Voltage: 10-16V
Continuous Wattage @2Ohm: 200W
Dynamic Wattage: 700W
Max Current Draw: 30A
Frequency Response: 20-150Hz
RCA Input Voltage Sensitivity: 0.5V
High Level Input Sensitivity: 110mV
Low Pass Filter: 50-150Hz
Subsonic Filter: 20Hz (fixed)
Bass Boost: 0-12dB @45Hz
Remote Subwoofer Control: Yes
Power Wire Gauge's 8
Dimensions: in 15 x 11.25 x 3
Dimensions: mm 381 x 285.75 x 76.2.
