The Tulipan draft improver is a device that dynamically uses the force of the wind to increase draft. The turbine always rotates in the same direction, regardless of the wind's strength. It is installed on top of the gravity ventilation duct. The design of the stove allows it to be installed in chimneys with several ventilation ducts close together. The patented forced motion installation method allows Tulipan to be installed without any additional tools.
INTENDED USE
- When there are wind fluctuations at the channel opening caused by its poor location
- When the terrain is bad and often causes strong winds
- When the channel does not pull or pulls poorly
- To improve natural (gravitational) ventilation
- Gravity ventilation ducts
- Sewer piping deodorizing pipes
- Rado exhaust pipes
- The cottage screamed etc.
- Prevents the flue from turning in the wrong direction. (Cold air does not come downwards).
- Maximum temperature in use: 150°C
- Rotating unit: ball bearing system immersed in high temperature oil
- Turbine diameter: 195 mm
- Suitable for 100 and 110 mm pipe
- Total height: 425 mm
- HVAC: 7821606
