MPPT type charge controller with LCD display. The MPPT controller charges up to 35% more efficiently than traditional PWM controllers.
The 30A MPPT controller is suitable for 12V battery systems with max. 360 W panels, and for 24 V battery systems for max. The MPPT technology automatically adjusts the voltage to current ratio to suit the battery.
The MPPT technology automatically adjusts the voltage to current ratio to suit the battery. The power output depends on factors such as the amount of light, temperature and type of solar cells. Optimal performance is continuously monitored by the device's internal microprocessor, allowing the MPPT system to keep the battery charged at maximum efficiency. When the maximum charging voltage of the battery is reached, the regulator automatically switches off the charging current. The microprocessor also monitors all important protection functions.
Specifications:- MPPT technology that provides high efficiency for the solar system
- Two inputs for the panels
- LCD display shows, among other things. The LCD display shows battery voltage, current generated by the panel, actual amps, etc.
- Automatically detects 12/24 V system voltage
- Input voltage: 20-60 V / 30-90 V
- Temperature-dependent correction of charging parameters
- Full electronic protection (polarity protection, over-current, short-circuit, overheating, power cut-off, lightning protection, etc.)
- Switchable load output
- Power efficiency: 95%
- Battery types: GEL, AGM, WET
- Consumption on load: 130 mA, active consumption 15 mA
- Protection: IP20
- Lifepo4 compatible
- Dimensions (L x W x H): 17.5 x 19.5 x 9.5 cm
- Note. The package manual incorrectly states Rs232 communication interface, this is not included in the controller.
