• UHF transmission on 48 channels
• A or B channel group selection
• Compatible with RX8 Pro and SP-RX8 Pro
• Automatic locking prevents unintentional adjustment
• OLED screen
• Locks for XLR and 3.5 mm TRS inputs
• Selectable microphone, line input
• Two AA batteries as power source
The BY-WXLR8 Pro Plug-On XLR transmitter is designed for BOYA RX8 Pro and SP-RX8 Pro UHF wireless microphones. It allows you to connect any dynamic XLR microphone or battery-powered XLR condenser microphone with the RX8 Pro and SP-RX8 Pro wireless receiver.
It has an easy-to-read LCD screen, wide switching bandwidth, Mic / Line inputs and digital circuits, a durable and lightweight housing, and is suitable for DSLR cameras, camcorders or VCRs, field recording and TV broadcasting.
- UHF frequencies for interference-free reception
- OLED display with information about level, battery status, mute and channel selection.
- 24 MHz bandwidth
- Powered by AA batteries or rechargeable NiMH batteries.
- With the pilot volume control, you can maintain the integrity of your voice and avoid disturbing sounds.
- Compatible with RX8 Pro and SP-RX8 Pro
- User-friendly menu with more control options
Technical information
- Channel group: A or B
- Carrier frequency range: 556.71 MHz - 575.98 MHz (Transmitter A)
- 576.39 MHz to 595.66 MHz (Transmitter B)
- Channels: 48
- RF output power: ≤10 mW
- Audio input connector: XLR
- Reference deviation: ± 5 kHz (–60 dBV, 1 kHz input)
- Input frequency range: 20Hz-20KHz
- Distortion: 0.5% or less
- Dimensions: 5.7x4.55x11.7cm
- Weight: 162 g (without batteries)