Garden fountain cement, does not include a pump.
Size: 80x60xH80cm
The concrete statues and fountains are made of Danish white concrete and are well suited to Finland's changing conditions. The patina on the statues is made by hand painting.
The manufacturer, Polish STOR, is Europe's largest manufacturer of concrete statues and has been awarded several quality certificates.
The warranty does not cover damage caused by the customer himself, for example leaving water in a fountain or pool.
The statues can also be painted afterwards with concrete paints. Cracks can be repaired with e.g. chemical metal (Plastic padding)
It would be best to store the fountain in a warehouse or shed for the winter. Since this is not possible with large fountains, follow the instructions below. This is how you can make your fountain stay beautiful and last year after year. In the fall, before the temperature drops below freezing, drain the pools by removing the silicone plug at the bottom of the pool. Make sure there is no water left in the foot of the fountain by tilting the foot part. This is important, because when the water freezes, it can split the leg. When the water has been removed, you can put the plug in place so that the foot of the fountain stays dry and meltwater does not get there. It would be advisable to put a fountain hood on the fountain, which is waterproof and UV protected. Under no circumstances should you use, for example, a garbage bag, because the sun will burn off the paint patina with its UV radiation. A better option is, for example, a light blanket.
