White water-based facade paint for wooden fences, eaves and corner boards.
INSTRUCTIONS FOR USE:
Painting wooden fences: remove any resin from knots with a steel trowel. Wash moldy or algae-covered surfaces with a mold remover and let the surface dry thoroughly before painting. For a longer-lasting result, prime untreated boards with an exterior primer first. If the surface has been previously painted and is firmly attached and does not crack, you can paint directly over it with Aitamaali. Paint the ends of the boards carefully so that water does not absorb into the structure in the direction of the wood grain. In addition to fences, Aitamaali is particularly suitable for eaves or corner boards.
COVERAGE: 5-6 square meters/liter for sawn wood. Approximately 8 square meters/liter for planed and previously painted wood.
DRYING TIME: 1-2 hours at a temperature of +23 and a humidity of 50%. At lower temperatures and higher humidity, the drying time is longer.
WASHING OF TOOLS: water.
PAINTING CONDITIONS: during painting and paint drying, the temperature must be above +5 degrees and the relative humidity below 80%.
TRANSPORTATION AND STORAGE: transport in an upright position and supported. Protect from freezing. Keep out of reach of children.
