The Aneto fuel-fired infrared heater, developed and manufactured by Weltem, is suitable for a wide range of applications. The Aneto heater is ideal for heating garages, halls, renovation sites, summer cottages and even terraces. It is ideal for any situation where a heating appliance is required to provide economical, safe and low-emission heating.
The infrared radiation produced by the Aneto heater warms solid materials that store thermal energy, which then store and release heat into the surrounding space. The heat produced by the heater is pleasant and even, and never too hot. The heater emits no fumes or visible smoke into the air. The appliance does not require a flue for combustion gases provided that the ventilation in the space to be heated complies with regulations – for example, garages, patios, tents, etc. When heating living spaces, a flue must be installed to vent the gases outside.
The Aneto heater is an extremely safe heating appliance featuring a comprehensive safety system:
- If the heater tips over or is subjected to a strong jolt, the motion sensor is activated and the appliance switches off.
- The heater is fitted with overheat protection which switches the appliance off if the sensor temperature exceeds +105 ⁰C.
- Two-stage fuel level monitoring. An audible alert indicates when refuelling is required.
- Timer. The appliance can be set to switch off automatically.
- flame guard
- ignition safety system
- power cut-off detection system
- fuse
- burner protection
- burner start-up safety device
- Temperature sensor fault detector
Technical specifications:- Heating output: 8.1 kW (room size: 45–60 m²)
- Fuels: diesel, heating oil or white spirit
- Fuel consumption: 0.72 l/h (continuous heating operation)
- Fuel tank capacity: 24 litres
- Dry weight: 63 kg
- Power consumption: 40 W (230 V, 50 Hz)
- Dimensions: (L x W x H): 770 x 320 x 870 mm
- Noise level: 43 dB
- Temperature control range: 0–40 ⁰C
- Warranty: 1 year
