Alpinestars Tech Air 10 race system
- The wireless LED remote signal display indicates the operating status of the airbag.
- The operating time of the integrated, certified lithium-ion battery is 24 hours.
- The continuous improvement of the intelligent crash safety algorithm is based on years of research with the world's best MotoGP riders and Alpinestars customers, analyzing data from millions of kilometers and thousands of accidents.
- The Tech-Air® 10 system is very easy to use; just pull the zipper forward and fasten the belt to activate the airbag system, and you're ready to go. The internal belt automatically activates the system when it is fastened and secured.
- In Race Mode, the Tech-Air® 10 system is only active when driving over 60 km/h (37mph) for at least 10 seconds. The system switches off before this activation or when the rider's speed falls steadily below this speed for at least 10 seconds. This is the standard behavior of the Tech-Air® 10 airbag system in Race Mode, as it is normal for the driver to not want to deactivate the airbag in fast stop and go situations. In such conditions, it is safer for the driver that the system automatically deactivates the airbag to avoid unwanted deployment of the airbag.
- The wireless LED remote control display can be moved to the driver's arm to easily check the system status. The LED screen can also be attached to the bike according to the driver's wishes.
- Charging the Tech-Air® 10 system's exhausted battery with the included USB charger takes about 4 hours. A fully charged battery lasts about 24 hours of use. If time is limited, charging the battery for about 1 hour enables about 6 hours of use.
- The airbag itself is breathable and has air channels and a perforated back to provide airflow and improve driver comfort.
- Tech-Air® 10 System can be quickly attached to Alpinestars' Tech-Air® 10 System Base Layer with easy-to-use side zippers; this allows the rider to change the base layer between rides if desired.
- Tech-Air® 10 System Base Layer is hand washable.
- The total weight of Tech-Air® 10 (System and base layer) is 2,390 g in size medium.
- Tech-Air® 10 is designed for track and road use and can be used with both RACE and STREET cycling modes with special AI crash detection algorithms. RACE driving mode may only be used for driving on closed race tracks, and may not be used for other types of driving.
- Bluetooth connection to the Tech-Air® App provides the driver with airbag system operating status, battery status and MyRide trip information.
- Via the Tech-Air® App, drivers can also update the system's firmware when new crash detection algorithms are released.