The application control Smartline APP is available as an option for the external control center. With this, you can also control the stove with an application that can be downloaded to a mobile device. Smartline APP includes a control unit, a transmitter, a door switch, a touch screen panel and two sensors: a thermostat and a temperature sensor. The control unit is placed in the technical room, not in the sauna room. The transmitter can be placed in the same space as the control unit. When placing the transmitter, it is important that there is a wireless network connection at the location. If necessary, the transmitter can also be connected to the home network with a fixed cable.
The sensors are placed on the wall above the stove, about 20 cm from the ceiling. From the technical point of view, the cables needed for the sensors (2 pcs.), size 5 x 0.75, are not included in the delivery.
The door switch is part of the Smartline App delivery as an accessory and is installed in the sauna door. The door switch increases operational safety when the stove is controlled with an app. The switch ensures that the sauna room is safe and the heater can be switched on remotely. The door switch can be encased or installed in the door frame of the sauna room, and it is connected by wiring to the control unit located in the technical room. If there is a glass wall/door in the sauna, the door switch must be taken into account well in advance when making the wall/door.
In addition to application control, the stove can also be controlled with an easy-to-use digital touch screen.
