What makes the Aino stove unique is its modern style and excellent steaming properties. The saunas of the Aino stove create a lot of steam in the sauna room, thanks to which you get a unique moist and relaxing sauna experience. Thanks to the pleasant temperature, it is easier to breathe and relax in the sauna. Aino stoves are manufactured in Finland.
The Aino stove is available with a fixed control or an external control center. In addition, application control can be connected to the model of an external control center.
Fixed control: the thermostat and timer controls are on the bottom of the stove.
External control center FCU5000 Design Touch: includes a control unit, a touch screen panel and two sensors. The installation of external control should be taken into account in planning the sauna well in advance.
Application control FCU5000 Design Touch and Smartline APP: includes control unit, transmitter, door switch, two sensors and touch screen panel. The stove can be controlled with a phone application or touch screen. The installation of the application control should be taken into account in planning the sauna well in advance.
We recommend the Aino stove with an external control center and application control to those building a sauna or doing a complete sauna renovation. Installation of the control center requires e.g. wall penetrations, so adding these to the finished sauna is more difficult. If you are changing from a heater to a new one, the best option is a fixed control heater.
The unique structure of the Aino stove should be taken into account when placing the stove and designing the sauna room. Aino-kiuas is a floor-mounted heater, which can also be easily embedded in shelves if desired. Please note that the resistance unit must be able to be pulled aside for maintenance, it is good to leave a maintenance space in front of the stove. The deck boards of shelves near the built-in stove should be designed to be detached.
The Aino stove can hold approx. 90 kg of stones. The large amount of stones and the temperature difference between the stones create a sauna experience in the Aino stove. Rounded olivine diabase stones with a diameter of approx. 10 cm should be used in the Aino stove. The right stove stones are the secret to the excellent steaming of the Aino stove. Place the stones in the stove as loosely as possible, so that air can move between the stones. There is a lot of stone space, because the resistors are separated from the stones. If you wish, you can replace the surface stones of the stove with white decorative stones. White stones have no heat value.
It is possible to change the look of the Aino stove with replaceable covers. The replacement covers have a wonderful selection of colors and the stove covers are easily replaceable. The Aino stove consists of two shell parts: the upper and lower parts.
Please note that the actual color shades may differ from the product color in the picture
PRODUCT INFORMATION:
- Heating power: 9 kW
- Height: 900 mm
- Diameter: 560 mm
- Weight without stones: approx. 32 kg
- Quantity of stones: approx. 90 kg, stones to be ordered separately
- Sauna room size: 8–12 m³
- Protective distances: to the ceiling 920 mm, when embedded in board structures 10–15 mm from the top of the shell and 20 mm from the bottom of the shell, when installed next to the wall 15 mm from the widest part of the stove
- Material: metal
- Country of manufacture: Finland
- Warranty period: 2 years
- The Aino stove is supplied with a five-pole power cord.
- The heater is delivered with fixed control buttons, remote control is available as an accessory