Self-adhesive tiles are an easy do-it-yourself project that allows you to update your home effortlessly without renovation. These tiles are suitable for use in kitchen and bathroom partitions, countertops, table tops, bedrooms, living rooms and other flat surfaces. These self-adhesive tiles do not require grouting or cementing and are easy to clean by wiping with a damp cloth. Self-adhesive tiles are resistant to water, oil, high temperatures and mould. Can be used on kitchen or bathroom surfaces. Recommended for use on smooth surfaces.
Cleaning the installation surface. Use a degreasing agent and clean the surface thoroughly. Allow the surface to dry completely before starting the installation.
Drawing guide lines:Draw guide lines at the starting point on the installation surface using a ruler and chalk/pencil. This will help ensure that the tiles are installed straight and level.
Cutting edges. This will ensure that the first tiles lay correctly and provide a good foundation for the other tiles.
Removing the protective plastic: Remove the protective plastic from the back of the tile. Make sure the adhesive surface remains clean.
Placing the first tile: Place the straight edge at the first guideline line. Press the tile firmly against the surface to make sure it sticks properly.
Installing the remaining tiles: Install the remaining tiles by overlapping them so that the tiles fit tightly together without gaps.
Self-adhesive tile adhesives are resistant to splashing water and oil. Can be used on e.g. kitchen or bathroom surfaces. Recommended for use on smooth surfaces. WARNING: In the vicinity of open fires or gas stoves, the distance to the tile must be at least 20 cm.
Dimensions (cm): length: 30, width: 0.3, height: 30
Weight (kg): 0.118Material: polyurethane resin, PETMaterial: polyurethane resin, PET.
