Unique powder composition, made of aluminum oxide
Gentle removal and unique mirror-clear polishing
Effortlessly removes sanding marks from roughness starting at P3000
Thick texture
The polish does not splash
Economic
Low dust formation
Can be applied by hand or by machine
Does not contain silicone Painted surfaces in the automotive, marine or wood industry. (solvent-based paints, single- and multi-component paints, water-based paints, powder paints, scratch-resistant, clear varnishes). Not for matte paints. Shake the bottle well before use. Spread the polish evenly on the paint surface with a soft polishing cloth or pad in circular motions. Polish the surface. Remove excess polish with a microfiber cloth.
Mechanically:
Moisten the surface of the selected polishing pad/pad evenly with the polishing agent and spread it slightly on the surface to be polished. Place the polishing disc/pad flat against the base and start the machine. Work the surface with a certain pressure until the unevenness and damage to the paint surface disappear. Remove excess polish with a microfiber cloth. Due to its chemical composition, this polish is safe when used for its intended purpose.
Recommended pad/pad: Orange polishing pad or sheep's wool polishing pad
In order for the surface to be optimal without micro-scratches, the hologram-removing polish P30 Plus must not be mixed with other polishes or solvents. Otherwise, the warranty will expire.
Can be stored in the original packaging at a temperature of 15-25 °C for 24 months. Protect the packages from frost and direct sunlight during storage and transport. Polishing agent intended for high-gloss finishing, which permanently removes marks and holograms from dark vehicles.
- Product length/depth: 5.4cm
- Product width: 5.3cm
- Product height: 17.7cm
CLP
Warning signs, attention word, danger phrases and safety phrases are not needed
