Esteri SyncroDry RC is a heat pump air dryer designed for drying laundry, which reuses the heat for drying. The RC microprocessor monitors the machine's functions. An external control device OKM, AKM, HMH or VAK control is used for control. In the renovation, it can be connected to the existing control device. Operating information, maintenance notices and trouble codes appear on the machine's screen. Drying room size 5-15 m², time control (external)
Thanks to the heat pump function, the energy consumption is low, only 0.36 kWh/kg. The very quiet running sound allows the machine to be used throughout the day.
Quick to install- The electrical connection points of the air dryer are concentrated in one place under the lid. The output height of the exhaust pipe is 430 mm. In this way, a sufficient drop is obtained in the outlet pipe, even if the sewer connection is further away. The discharge pipe can also be connected directly to the sewer network, as the machine has an odor trap. Condensate can be pumped upwards with the optional drain pump.
-Drying room 5-15m²
-Drying capacity 2.1 – 3.7 l/h
-Drying time 80 min
-Energy consumption 0.36 kWh/kg
-Time control AKM or OKM
- Heat pump condensing
- Sound level 56 dB
-Dimensions L630 x W560 x H1020 mm
Electrical connection:
- Current type 3N 400V 50hz
- Connection cable 5x1.5mm²
-Fuses 3x10A
Heating power 2.3 kW (thermostat-controlled preheating resistor)
Maximum rated power 3.9 kW
Drain connection:
-Connection Ø 32mm
-Height from the floor 430mm
The product has a 2-year full warranty for housing associations and a 5-year structural warranty.
